Fujairah Rockwool Loose Wool is bonded loose wool used for packaging cavities of irregular dimensions. The density of wool to be used depends on the thermal conductivity required. Thermal conductivity will be the same as other Fujairah Rockwool products of the same density.
Used for general purpose insulation, expansion relief, packing cavities of brickwork in furnaces, ovens and many other items of industrial equipment. It is also used for cavity packing in refrigerated cargoes, oxygen plants, valve boxes, automobile mufflers and other types of silencers. It is highly suitable especially where preformed insulation is difficult to apply.
Packed in 20 kgs bags. Other packaging weights are available upon request.
Rockwool Insulation alone is non-combustible when tested in accordance with BS-476 Part 4 1970 and ASTM E-136, Class A, when tested in accordance with ASTM E-84.
Plain Rockwool Insulation has a service temperature of 780°C when tested in accordance with DIN 52271 for 80 mm thickness and 100 kg/m3 density. However there is possible deviation for lower densities.
The density of loose wool depends upon the compression resistance for a particular application. The following are typical figures of thermal conductivities
|Mean Temp °C||k-Value W/mK 60 kg/m3||k-Value W/mK 80 kg/m3|
We have test reports at 35°C mean temperature for 40 kg/m3 ,70 kg/m3 and 110 kg/m3 densities and at different mean temperatures for 140 kg/m3 nominal density. The table shows the test results for their raw density in accordance with the test report
Compatible with all other forms of material with which it is likely to come in contact in normal industrial and building applications.
Water repellent, non-hygroscopic, non-capillary it does not absorb any moisture from the air. Moisture has no effect on the stability of the product.
Rot-proof, non-hygroscopic, will not sustain vermin and will not encourage growth of bacteria, mold or fungi.
Chemically neutral with a pH value of 7-8 when tested in accordance with BS 2972 : Section 22. It will neither cause nor promote corrosion. It meets the requirements of ASTM C-795 the standard specification for thermal insulation for use in contact with austenitic stainless steel when measured according to standard methods of ASTM C - 692 (Corrosion Test) and ASTM C -871 (Chemical Analysis). It contains low level of chlorides when tested in accordance with BS 2972 : Section 21, ASTM C-871 and AGI Q 135.
Supplied in polyethylene bags.